In one given year, 27.94% of homeowners reported the need for plumbing repairs. There are a variety of things that cause the need for quick plumbing repairs. From clogged drains and sump pump failures to leaky faucets and issues with your water heater, a lot of things can go wrong.
These are reasons that advanced plumbing services are in such high demand among homeowners. Something like a leaky pipe might seem small and simple but when it goes unfixed, it can pose a wide range of problems. Things like mold, extensive water damage, and eventually…structural damage are things you’ll need to look for.
Keep reading to find out the top five things to look out for to tell if you’ll need advanced plumbing services.
1. A Problem With Leaking Pipes
Advanced plumbing services are a way to optimize plumbing systems to give homeowners better functionality. Plumbing pipe problems that are causing consistent leaks are one of the top reasons for needing these services. Leaking pipes in one part of your home could mean that there are other leaks throughout your home as well.
This could cause unwanted mold growth. Exposure to mold won’t only affect the surface of your home but also your health. If you notice that you are experiencing unusual nasal stiffness, irritation of the throat, or coughing, and you notice a water leak, these could be signs of mold growth you haven’t noticed yet.
Leaking pipes could also be a sign of a far worse issue and could lead to flooding – a worst-case scenario. If you notice poor water quality, stained surfaces such as your walls, and pooling under cabinets where plumbing is, you could have a leaky pipe. It’s also not always as simple to fix plumbing system issues like this and you may need advanced plumbing technology to ensure the issue doesn’t cause a ripple effect throughout your home.
2. A Burst Pipe
A leaking pipe could be a cautionary sign that you may be looking at a potential pipe burst. A burst pipe is an immediate need for emergency plumbing services to get pipe repair. The first thing you will want to do is to find the main water supply to your home and shut it off immediately to keep your home from flooding.
This will protect your property from costly water damage and protect you from the potential issue of damaged structural integrity. When you do this, make sure to leave your faucets on.
This will help to drain your pipes and to relieve additional pressure. If you noticed a leaky pipe before a pipe burst, this could be a sign that you need to initiate a cast iron pipe inspection after the issue has been fixed.
3. Water Discoloration
After your burst or leaky pipes are fixed and you turn the water back on, pay attention to the color of the water. Water discoloration can often mean you have a buildup of mineral deposits in your pipes.
This is often caused by your home’s water being turned off and back on. If it’s discolored, this could be another sign that you need a pipe inspection. If you noticed water discoloration before issues with your pipes this is still an issue.
For example, if you’re noticing that your water seems brown all of a sudden, this is an indicator of a pressure change. This often will come from changes in the city’s water line pressure and will often fix itself. However, it’s also possible for you to see a brown tinge in your water if you recently replaced your plumbing as well.
Discoloration could also be a sign of rusted pipes and rusty pipes will lead to rusty water. This is something that can lead to significant problems of unwanted bacteria growth.
Overall, discoloration could mean a sediment buildup and this is something that could cause pipe blockages and uneven water pressure as well. There are some simple home remedies to help fix these issues such as using a combination of boiling water, baking soda, and vinegar, but it’s often easier to work with an experienced plumber as an alternative.
4. You’ve Run Out of Hot Water
Keep in mind that the hotter the water, the more mineral deposits there will be. This can make your pipes more susceptible to clogging over time. While this isn’t abnormal, it’s something you want to pay attention to.
If you’re running out of hot water quicker this could also be a sign that your dip tube is broken. The dip tube is just an internal pipe in your water heater. Speaking of the water heater, low water temperatures could also be a sign of broken heating elements in the heater itself.
You may also just have sediment buildup. There are a variety of things that can lead to less hot water or hot water running out quickly and they can all be fixed with advanced plumbing services.
5. Slow Drainage or None at All
Slow drainage is usually a clear sign of a clog in the plumbing system. This is something you will want to fix right away because it can lead to more issues later on. Clogs don’t have to be some that got lodged into a drain.
Over time, soap and even grease can cause clogs in your plumbing. If you have slow drains or you’re not getting any drainage at all, pay attention to a few other things.
Pay attention to signs of mildew or if there are any harsh smells in your home. These signs coupled with drainage problems could be a sign of a broken pipe underground and will call for the plumbing services.
Protecting Your Home With Advanced Plumbing Services
Keep in mind that good advanced plumbing services mean water control. It’s normal to encounter issues with plumbing now and then, and they can often occur when you least expect it.
To be proactive, know what to look for from harsh smells, and mold to slow drainage or leaky pipes. Problems that may seem small could just be a warning sign of a much larger problem and this is why you need to handle problems as they arise with quality plumbing services.
To get more life-saving tips, keep reading our helpful content.