How To Change Brake Light Bulb?

How To Change Brake Light Bulb? The brake lights are a crucial safety feature on your vehicle, as they signal to other drivers when you’re slowing down or stopping. Over time, the brake light bulbs can burn out and need to be replaced. If you’re unsure how to change a brake light bulb, don’t worry – it’s a simple process that can be completed in just a few steps. In this blog post, we’ll provide you with step-by-step instructions on how to change a brake light bulb.

How To Change Brake Light Bulb?

Step 1: Determine Which Brake Light Is Out

The first step in changing a brake light bulb is to determine which one is out. Ask a friend or family member to press on the brake pedal while you stand behind the vehicle and check each brake light.

Step 2: Turn Off The Vehicle

Before you start replacing the brake light bulb, make sure that the vehicle is turned off and the keys are removed from the ignition.

Step 3: Remove The Bulb Housing

Depending on your vehicle model, you may need to remove the bulb housing by either twisting or pulling it off. Refer to your vehicle manual to determine how to remove the housing.

Step 4: Remove The Old Bulb

Once you’ve removed the housing, you can access the bulb. Gently pull the old bulb out of its socket.

Step 5: Install The New Bulb

Insert the new bulb into the socket. Make sure that it’s seated properly and securely.

Step 6: Reinstall The Bulb Housing

If you had to remove the bulb housing, put it back in place by either twisting or pushing it back into position.

Step 7: Test The New Bulb

Turn on the vehicle and test the new bulb by pressing on the brake pedal. Make sure that the light illuminates properly.

You can search for more about similar topics like these on Tipsfeed.


Can I Replace A Brake Light Bulb Myself?

For the most part, yes, it is easy to replace a brake light bulb. Sometimes, newer vehicles can be a bit more complex due to wiring and the tail light assembly, but it’s still possible to do it on your own.

Does Autozone Replace The Brake Light Switch?

Brake Light Switch or Turn Signal Problems

Inspect the connection to the switch and make sure there is no corrosion or damage, and then, a replacement switch can be installed, and purchased at your local AutoZone.

Is It Easy To Change Your Own Brake Light?

Changing a brake warning lightbulb is an easy task. You can perform it by yourself at home without the help of a professional. However, you might require their help in case you get stuck at any point. All you need to do is get rid of the old bulb and install a new one.

How Much Does It Cost To Replace A Car Brake Light Bulb?

$100 – $200

$100-$200. The average cost to replace your brake light bulb is $100 – $200. Pricing may vary based on the type of car you have, as well as the type of (and quality) auto shop that you go to.


In conclusion, changing a brake light bulb is a quick and easy process that can help ensure your safety on the road. By following these instructions, you can replace a burnt-out bulb in just a few minutes. Remember to consult your vehicle manual if you’re unsure how to remove the bulb housing, and test the new bulb before hitting the road.


I Have Covered All The Following Queries And Topics In The Above Article

How To Change A Brake Light Bulb

How To Change The Brake Light Bulb

How To Change Brake Light Bulb Vw Golf Mk7

Cost To Replace Brake Light

Rear Brake Light Bulb

How To Remove Tail Light Bulb From Socket

Brake Light Change Near Me

How To Remove Tail Light Cover

Where Can I Get My Tail Light Fixed

How To Change Brake Light Bulb

Do you need to disconnect battery to change brake light bulb

How do you replace a brake light bulb?